Showing posts with label Learn with pictures. Show all posts
Showing posts with label Learn with pictures. Show all posts

learn Make a Beaded Ring Link



Materials:
Tools:
Various seed beads or small beads
Tigertail™ or stringing cable
1 Crimp Tube Chain Nose Pliers
Wire Cutters


Instructions:


Step 1: Cut a small piece of Tigertail™ or stringing cable. The length of cable depends on how big you want your ring to be, just keep in mind you will be running the cable through twice and will need some extra length. Next, string seed beads or other small beads onto your cable in whatever pattern you choose (be creative
                                                                 

 Step 2: String a crimp tube onto your cable and pass both ends of the cable through in opposite directions.








 Step 3 : String the cable through your beads a second time.







 Step 4 : String through the crimp tube a second time, again passing the cable ends in opposite directions as in Step 2.











                                                                             
                                                                             Step 5: Using your chain nose pliers over crimp tube squoosh the crimp tube flat.                                      
                                                                                   
                                                                                Step 6 : Trim ends close to crimp tube. I left mine naked, but you can use a crimp cover if you like.
                                                                       
                                                                                 





Tips:
If you are going to link your bead rings remember to link them before you complete each link!

If you plan on using crimp tubes or crimp beads often, you may want to pick up a pair of crimping pliers. They are specifically designed to crimp in a two step process that will give you a much cleaner result than chain nose pliers.

Experimentation is key in any craft, but certainly true here. Don’t be afraid to try something different; you might surprise yourself with the results.

learn how to make ankle bracelets

Here are the instructions:

Gypsy Hemp Anklet




Hemp twine, 20 lb. test (~1mm wide)

A pendant or charm

1 bead for the bead closure

Measuring tape

White glue

Useful Links:

Glossary of Hemp Jewelry Making Terms

How to Make an Overhand Knot (OH)

How to Make a Square Knot (SK)

How to Make a Switch Knot (SW)


Step 1 : Cut two 5 foot lengths of twine.



Step 2: Make the loop side of a switch knot clasp by laying folding one length of twine over the other (leave the second unfolded) (Fig. 1).





Fig. 1



Step 3 : Use the crosswise cord as your knotters. The fold cord will be your fillers. Make 2 SK's around your fillers (Fig.s 2, 3, 4). These knots will be your sliding closure. Give it a test slide by grasping the knots with your forefinger and thumb, and holding the loop with your other hand. You should be able to slide the knots up and down the filler cords.







Fig. 2





Fig. 3





Fig. 4





Step 4 : Slide the knots you just made up so that the loop is small (see Fig. 5).



Fig. 5



Step 5: Make a switch knot (Fig.s 6, 7) about a thumb's width in size (see Fig. 7), securing with an SK (Fig. 8).









Fig. 6





Fig. 7





Fig. 8







Step 6 : Determine how long you want your necklace to be, then follow this pattern: 1 SW, 2 SK, until your work measures 1/2 your finished necklace measurement.







Fig. 9



Fig. 9 - hemp necklace detail



Step 7 : Grab the ends of 1 filler and 1 knotter cord that are adjacent (next to each other). Slide your pendant or dangle onto those 2 cords. (See the top photo of the finished necklace to see how this will work)



Step 8 : Continue the 1 SW, 2 SK pattern until your necklace measures the desired length.



Step 9 : Using all 4 cords, tie a tight OH close to the last SK.



Step 10 : Try to fit the cords through the hole of your closure bead. If your bead doesn't fit onto all 4 cords do the following. Cut 1 or 2 cords off close to the knot and dab some glue onto it. Don't cut off more than 2 because your bead closure will be too flimsy to last for long.



Step 11 : Slide your closure bead onto your remaining cords. Leave a little slack on the cords, and tie an OH using all remaining cords.(Fig. 10).



Fig. 10



Step 12 : Dab some glue on the end knot and trim. Let dry.



To close the necklace, slip the bead through your thumb's width-sized switch knot. Slide the first 2 SK's away from the end loop (the first loop you made) to close securely. The roughness of the hemp cord should be enough to keep it from slipping open again.



Alternatively, you can slip the bead through the first loop instead.



Now you can check that off the To-do list. Hemp necklace making. Done!













Read more: Groovy Hemp Necklace Making http://www.how-to-make-jewelry.com/hemp-necklace-making.html#ixzz1LU04VJ4a

how you can used leftover wax and make a beautiful and unique candle

You Will Need:


Wax Cut-outs (See Pillar Embellishment Tutorial)

Pre-Tabbed Wick (of the appropriate size for your cut-outs)



When you make your wax cut-outs to embellish a pillar candle, you should have quite a few leftover shapes. If not, you can follow steps 1-5 of the Pillar Candle Embellishment Tutorial to create the shapes.


Simply thread a pre-tabbed wick through the hole in each of your wax shapes and push all the way down onto the wick tab.





Arrange the shapes as desired. You can align them for a straight shape, or twist them for a spiral look.



For better adhesion between the layers, you can melt the top of each shape with a heat gun and press down with each new shape.



When you have used up all of your wax shapes, trim your wick to about 1/4" and enjoy!

flowers Free Standing Arrangements

Free Standing Arrangements






1. Fill a shallow container with foam that extends one inch over the top. Secure the foam with hot glue, floral clay or floral tape. Define the shape of the design with the line flowers and leaves.











2. Place the focal flowers and leaves, turning the vase as you go so all the sides are even.











3. Add filler flowers to integrate the design.

flowers The lazy "S" or "Hogarth's Curve"

The lazy "S" or "Hogarth's Curve"





1. Anchor the foam securely. Bend the stems gently into graceful curves and insert them in place so they balance.











2. Add the focal flowers following the lines of the upper and lower curves.













3. Cluster filler blossoms and foliage around the central flowers maintaining the rhythm of the ‘S’.

flowers Oval arrangements

Oval arrangements












1. Secure the floral foam. Determine the height with line flowers, then frame in the outer edges of the oval shape with light colored flowers and foliage.





2. Place the largest, strongest or brightest flowers in the focal area.






3. Fill in around the larger flowers and leaves with the filler flowers.

flowers Minimal Arrangements

Minimal Arrangements




1. Adhere foam to container. Insert vertical line flowers to determine the height, and secure the horizontal line flowers to give the basic outline of the arrangement.


2. Place the focal flowers.















3. Fill in with filler flowers as needed.


flowers Crescent Arrangements

Crescent Arrangements










1. Secure foam in container. Determine length of crescent and insert curved line flowers or leaves to follow the crescent form. Angle the shape to balance in the container.











2. Insert the focal flowers fairly low in the bowl to achieve balance, stability and depth.











3. Fill in around the focal flowers with smaller flowers and foliage. Place wisps of filler flowers that gracefully taper off the ends.


flowers Triangular Arrangements

Triangular Arrangements


















1. Secure floral foam. Determine the vertical height and horizontal width with the smallest line flowers and/or leaves. Make the height higher than the width.











2. Position the largest focal flowers in the heart of the arrangement and slightly lower to give weight and balance.










3. Fill in with the filler flowers and foliage keeping within the triangular shape.


flowers arranging

Eight Basic Flower Arranging Designs




If you are used to working with fresh flowers, it will take some time to get used to all the possibilities and limitations when using silks. Though so similar in use, artificial flowers are an entirely different art form. The line, focal, filler technique is an excellent way to design artificial and dried flower arrangements.



Horizontal Arrangements







1. Using a relatively shallow container, anchor foam with a lot of glue or use anchor pins, and position sprays of line flowers to establish the shape of the design.







2. Insert focal flowers in the middle so they gently droop over the lip of the container on both sides, reach towards the line material and extend on either side of the middle. Leave room for filler flowers.







3. Fill in and around focal area with filler flowers and foliage


Vertical Arrangements
















1. Wedge or secure foam in a vase with hot glue. Cut the stems of the tallest flowers or leaves to reach three or four times the height of the vase.



2. Place the focal flowers vertically within the diameter of the vase.



3. Fill in the areas as needed with filler flowers.